SOLD OUT: SR-71 Brake Chute Set (for Revell)

This is a comprehensive set to build the Revell SR-71 with deployed brake chute. The Set includes:

• an open chute bay set (as HMR48047) in 3D printed resin (with a design modification to mount the riser shackle. You can't re-use 48047 for this)
• a lower riser bundle in cast resin with a carbon fibre rod inside
• a 3D printed riser fan-out piece (which connects the riser bundle with the individual riser lines and has 44 small holes for the riser lines to thread through)
• a roll of 50m of flat, unwaxed dental floss for making the individual risers from the fan-out to the canopy skirt
• 3 pieces of thin carbon fibre rod to (optionally) replace 3 "floss risers" and make the construction more rigid
• and most importantly: a one-piece 3D printed resin chute canopy.

The canopy is printed in flexible resin and with (for its size) minimal supports. Modelling skill is extremely recommended for this kit, it's not a shake-and-bake set. However thought and care went into designing everything to be as pain-free as possible. Instructions will be provided here for download (no print instructions will be included!). The assembly is about 50cm long from shackle to the top of the canopy and about 16cm in diameter. This set is extremel limited and available by pre-order only.

There won't be any printed instructions in the box, but instead can be downloaded here: SR-71 Full Chute Set (Revell) Instructions

SOLD OUT